Kromski Minstrel Jumbo Flyer Kit(Kromski Minstrel Jumbo Flyer Kit)

Extend the capabilities of your Kromski Minstrel wheel by adding a Jumbo Flyer Kit. You can quickly swap out your regular flyer for the jumbo unit (and back again). Here are the benefits: flyer with very large orifice 0.70 inch opening for heavy spinning and plying; much larger jumbo bobbin – holds 50 cubic inches of yarn; lower ratio ranges – 2 speeds – to give you excellent speed choices without changing flyer.

Features:

• Jumbo Flyer
• 1 Jumbo Bobbin
• Slow Whorl (4:1 and 6:1)
• Front Maiden with Jumbo Leather Orifice Bearing

NOTE: if you already own a Minstrel and want to add a Jumbo Kit, you must determine the manner in which your front maiden post has been installed on your wheel. If you do not have the current set-up – brass finger nut and bolt going up through the base into the maiden – you will need to do some simple woodworking to facilitate the jumbo option. You also have to purchase the brass nut as it does not come with the kit.  You can contact us to purchase the nut seperately. Watch the video below to see how to do this.  Also, this will not fit the discontinued Mazurka wheel.